Artee Flow Controls Private Limited

BW SOLO Easy to operate and to service — with an extensiveselection of sensor options.
Honeywell BW™ Solo replaces the GasAlert Extreme and ToxiPro®.
It delivers everything you love about these detectors — plus additional features to help you:• Reduce cost of ownership.• Ensure compliance.• Enable connected workers.• And know your workers are protected.

Small, lightweight profileHoneywell BW™ Solo is workers’ comfortable, reliable companion inhazardous environments.

The easiest single-gas detector to service — for long life and low cost No need to take apart the Honeywell BW™ Solo to replace components. Tochange out the sensor filters, just pop off a door on the front of the detector— no screwdriver required. Sensor and battery replacement are also easy.

Numerous sensors, including hydrogen (H2) Whether you’re monitoring for common or exotic hazards — in petrochemical plants, power plants, steel manufacturing or other environments —Honeywell BW™ Solo has the sensor you need:• Hydrogen sulfide (H2S)• Carbon monoxide (CO)• Oxygen (O2)• Sulfur dioxide (SO2)• Hydrogen (H2)• Ammonia (NH3)• Chlorine (Cl2)• Nitrogen dioxide (NO2)• Hydrogen cyanide (HCN)• Ozone (O3)• Ethylene oxide (ETO)• Phosphine (PH3)• Nitrogen oxide (NO)• Chlorine dioxide (ClO2)

5-year sensor life and 3-year warranty.No need to worry about sensors wearing out quickly, adding cost anddowntime. Instead, the 1-Series sensor lasts up to five years, dependingon gas exposure, along with a three-year warranty. Reduce your cost ofownership; increase your peace of mind.

Reliable performance without nuisance alarms.Despite the small size of the 1-Series sensor, it delivers consistently accurate readings, standing upto temperatures from -40°C to 60°C — plus transient pressure, humidity and other environmentalextremes.

Easy sensor switch-out.The 1-Series makes sensor replacement easy — with no need to disassemble the detector, exposing theprinted circuit board. Just take the old sensor out and drop the new one in.

With that combination of benefits, it's no wonder the Gas Alert Micro Clip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments keeping you safe without weighing you down. Plus, it's the only multi-gas detector with a rating of IP68 for unmatched water protection-up to 45 minutes at a depth of 1.2 m. So you can be confident it will stand up to challenging conditions.

Features:

• Guaranteed runtime for at least a 12-hour shift-down to -20°C-without compromising
• LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery-tested to last in extreme environments
• Ergonomic and wearable-doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars IP68 rating ensures maximum protection against dust and water up to 45 minutes at a depth of 1.2 m
• User-friendly, tamperproof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/ visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguesep
• Device Management with Honeywell Sotera

Use our unique advanced technology for safety, compliance and productivity:

• Advanced engineering for reliable battery performance
• Reflex Technology to ensure sensor responsiveness
• Compact, lightweight and easy to use — no expertise required
• Flashing green IntelliFlash light for compliance at a glance
• GasAlertMicroClip XL: low up-front cost with a two-year warranty.
• GasAlertMicroClip X3: three‑year warranty and a new oxygen sensor that extends overall expected service lifetime to 5 years.

Optional Accessories:

• MicroDock II
• IR connectivity kit
• Five unit cradle charger
• For a complete list of kits and accessories, please contact BW Technologies by Honeywell.

New to GasAlertMicroClip X3:

• Five-year life expectancy — plus a three-year warranty
• An all-new oxygen sensor that operates
• Consistently for five years — with no replacement costs for the life of the detector
• Superior cost of ownership — with minimized maintenance and maximized uptime

User Options:

• Confidence beep
• Set STEL interval
• The sensor on/off
• Latching alarms
• Safe display mode
• Stealth mode
• Calibration lock
• Auto zero on startup
• O2 auto calibration on startup
• Set bump test interval
• Force bump test when overdue
• IntelliFlash interval
• Combustible gas measurement (%LEL or % by volume methane)
• User-settable calibration gas level
• Force calibration when overdue
• Low alarm acknowledge
• Language choices
• Set custom startup message

1. Detects gases - LPG, CNG, Natural gas.
2. Gas is detected when LPG concentration exceeds about 10%-15% of LEL
(2,000-3,000ppm) in the given volume. LEL for LPG is 20,000ppm.
3. Potential free relay contacts for alarm output.
4. Semiconductor type sensor.

A tri-colour backlit LCD clearly indicates the
unit’s status at a glance, even from a distance.
A steady green backlight indicates normal
operation, flashing yellow indicates fault and
flashing red indicates an alarm.
*Electrochemical Sensors,Catalytic Bead Sensors & Infrared Sensors are available.

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications. The MultiRAE Lite’s optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Features:

• Wireless. Versatile. Proven.
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm2
• Over 25 interchangeable sensor options, including PID4 for VOCs, NDIR5 and catalytic for combustibles, and NDIR for CO2
• Intelligent sensors store calibration data, so they can be swapped in the field6
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)
• Available in pumped and diffusion versions
• Highly versatile and customizable
• Man Down Alarm with real-time remote wireless notification
• Easy maintenance with replaceable sensors, pump, and plug-and-play battery
• Fully automatic bump testing and calibration with AutoRAE 2

Applications:

• Personal protection and multi-gas leak detection in industries such as
• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

Alarms:

• Wireless remote alarm notification; audible (95 dB @ 30 cm), vibration, visible (flashing brightred LEDs), and on-screen indication of alarm conditions
• Man Down Alarm with pre-alarm and real-time remote wireless notification2

Datalogging:

• Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7)User-configurable datalogging intervals (from 1 to 3,600 seconds)

Communication and Data Download:

• Data download and instrument set-up and upgrades on PC via desktop charging andPC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System3
• Wireless data and alarm status transmission via built-in RF modem (optional)

Wireless Range (Typical):

• MultiRAE Lite to RAELink3 [Z1] Mesh modem ~330 feet (100 meters)
• MultiRAE Lite to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters)
• MultiRAE Lite Wi-Fi to Access Point - 330 feet (100 meters)

the
GasAlert Extreme reliably monitors for any single gas
hazard within its wide range of available toxic gas models.
With easy on/off operation, this single gas detector offers
extended longevity with a field-replaceable battery and
sensor. Calibration is a simple automatic procedure and
is compatible with BW’s MicroDock II automatic test and
calibration systemContinuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with
BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity
and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot