Artee Flow Controls Private Limited

The MS4105, MS4604, MS4609, MS8104 and
MS8109 Fast-Acting, Two-Position Actuators are spring
return direct coupled actuators (DCA) for Fire and Smoke
dampers (on/off control). The actuator accepts an on/off
signal from a single-pole, single-throw (SPST) controller.
Reversible mounting allows actuator to be used for either
clockwise (cw) or counterclockwise (ccw) spring rotation.

Honeywell VPI Pressure Independent Control Valves and Actuators integrates the flow, pressure and temperature control functions in a single valve and then automatically controlling the flow in each hydronic system circuit to maintain temperature and comfort when pressures fluctuate.

• Assures correct flow for each unit automatically – at all load conditions, securing optimal comfort.
• Maintains system balance perfectly, under all conditions, increases the energy efficiency and leads to savings on energy costs.
• Accurate flow regulation allows for the optimum sizing of chillers, boilers and pumps
• Full range of sizes from 15 mm (1/2") to 250 mm (10").

The model FSM-6100 electromechanical flow switch is designed for the detection of interrupted flow (“no flow”) of water and other non-corrosive liquids in industrial coolers, heaters or other industrial pipelines.

The flow switch signal is used for operational controls that prevent system failure, e.g. due to ice formation in the absence of cooling water flow.

The cost-effective flow switch is enclosed by a plastic case. The ingress protection of IP30 protects it from unwanted ingress of foreign bodies.

The model FSM-6100 is equipped with UL-listed microswitches and protective bellows to ensure high durability with continuous operation and a long service life.

The range of flow ranges, with pipe sizes from 25 ... 150 mm [1 ... 6 in], enables use for flow measurement in a variety of applications with non-critical media.

Details various types of ball valves, including:- Floating Ball Valves- Trunnion Mounted Ball Valves- High-Pressure Ball Valves- Cryogenic Ball Valves
Key features include fire-safe designs, anti-static mechanisms, blowout-proof stems, and different end connections (flanged, threaded, or welded).
Material & ConstructionThe valves are available in different materials such as carbon steel, stainless steel, duplex steel, and other alloys, catering to different industries.Seat and seal materials are designed for high-temperature and high-pressure applications.
Standards & CertificationsThe valves comply with international standards like API, ANSI, ASME, ISO, and DIN, ensuring industry-wide acceptance.
ApplicationsUsed in oil & gas, petrochemicals, power plants, water treatment, chemical processing, and general industrial sectors.

NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR
MODULATING AND FLOATING CONTROL

This non-spring return direct-coupled damper actuator. provides modulating and floating/2-position control for:

• air dampers,
• VAV units,
• air handlers,
• ventilation flaps,
• louvers, and
• reliable control for air damper applications with up to 10
sq.ft. / 44 lb-in. (5 Nm) and 20 sq.ft. / 88 lb-in. (10 Nm)
(seal- less damper blades; air friction-dependent)

The VBA16P-series of two-way control ball valves can be used
in the HVAC water systems of commercial and public buildings
to achieve modulating or On/Off control

Designed to be used with VBA16P and VBA16F Series Ball Valves
Mounting bracket included and pre-installed for easy field installation
Can connect to external auxiliary switch
Overload protection

Honeywell Y-type strainer Screwed is widely
used in water application and is used for
protecting valve and other equipments from
scrap and impurities in the system.

Dual Plate Check Valves is designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other check valves.