Artee Flow Controls Private Limited

Part of the SmartLine family of products, the STT 750 is a high-performance Temperature transmitter offering high accuracy and stability over a wide range of process and ambient temperatures. SmartLine easily meets the most demanding needs for temperature measurement applications.

Reliable measurement:

• Built in Galvanic Isolation
• Dual Compartment Housing
• Sensor Break detection
• Comprehensive on-board diagnostic capabilities
• Full compliance to SIL 2/3 requirements.
• Available with 3-year warranty
• Supports Namur 89 Wire break

Lower Cost of Ownership:

• Universal input
• Basic digital display capabilities
• Modular construction
• External zero, span, & configuration capability
• Polarity insensitive loop wiring

Communications/Output Options:

• 4-20 mA dc
• Hart (version 7.0)
• All transmitters are available with the above listed
  communications protocols.

Description:

• The SmartLine Temperature transmitter is designed and manufactured to deliver very high performance across varying ambient temperature.

Modular Design:

• To help contain maintenance & inventory costs, all STT 750 transmitters are modular in design supporting the user’s ability to replace Temperature boards, add indicators or change electronic modules without affecting overall
  performance or approval body certifications.
• Each Temperature board is uniquely characterized to provide in-tolerance performance over a wide range of application variations in temperature and due to the Honeywell advanced interface, electronic modules may be swapped with any electronics module without losing in-tolerance performance characteristics

Integral Three Button Configuration Option:

• Suitable for all electrical and environmental requirements, SmartLine offers the ability to configure the transmitter and display via three externally accessible buttons when either display option is selected.
• Zero/span capabilities are also optionally available via these buttons with or without the selection of a display option.

Hand Held Configuration:

• SmartLine transmitters feature two-way communication and configuration capability between the operator and the transmitter.
• This is accomplished via Honeywell’s field-rated Multiple Communication Configuration.
• The Honeywell Handheld MC Toolkit is capable of field configuring Hart Devices and can also be ordered for use in intrinsically safe environments.
• All Honeywell transmitters are designed and tested for compliance with the offered communication protocols and are designed to operate with any properly validated handheld configuration device

Personal Computer Configuration:

• Field Device Manager (FDM) Software and FDM Express are also available for managing HART device configurations

Diagnostics:

• SmartLine transmitters all offer digitally accessible diagnostics which aid in providing advanced warning of possible failure events minimizing unplanned shutdowns, providing lower overall operational costs.

System Integration:

• SmartLine communications protocols all meet the most current published standards for HART

Modular Features:

• Replace Temperature/Terminal board/Lightning
  protection
• Replace electronics/comms modules
• Add or remove integral indicators
• Add or remove external configuration buttons

Part of the SmartLine family of products, the STT650 is a DIN Rail mounted high performance temperature transmitter offering high measurement accuracy, stability and reliability over a wide range of process and ambient temperatures. SmartLine easily meets the most demanding needs for temperature measurement applications. The SmartLine Temperature transmitter is designed and manufactured to deliver very high performance. The total accuracy level of the transmitter including the ambient temperature effect in, harsh industrial environments, allows the STT650 to replace virtually any competitive transmitter available today.

Reliable measurement:

• Built in 1500VAC Galvanic Isolation
• Superior noise performance
• Sensor error detection in accordance with Namur 89

Lower Cost of Ownership:

• Universal input
• Dual channel option saves panel space
• Easy to configure, install and commission
• Can double up as position and level transmitters for valves and ohmic level sensors.

 

All the STT650 DIN Rail models with universal input are tested for the following parameters:

• Conducted Noise - 10Vrms in the range of 15Hz to 100MHz
• Radiated Noise - 10V/m in the range of 80 to 1000MHz
• Surge test - 1KV Differential mode ; 2 KV Common mode
• Burst Noise - 2.5KV

STT650 RTD Input type:

• Analog 4-20 mA output
• RTD or Ohm input
• Single or dual channel option
• NAMUR NE43 sensor error response
• Programmable using the STT17C PC Configuration tool

STT650 Universal Input type – Analogue Output only

• Analog 4-20 mA output
• RTD, T/C, Ohm or mV input
• NAMUR NE43 sensor error response
• Programmable using STT17C PC configuration tool
• Galvanic isolation

STT650 Universal Input type - HART protocol:

• HARTTM/4-20 mA output
• RTD, T/C, Ohm or mV input
• Single or dual channel option
• Supports Differential or Averaging measurement
• NAMUR NE43 sensor error response
• Programmable using MCT404 or STT17C PC configuration tool
• Galvanic isolation

STT650 Universal Input type – FF/PA Protocol

• Foundation TM Fieldbus protocol
• PROFIBUS PA protocol
• RTD, T/C, Ohm or mV input +mA +/- 100mA
• Single or dual (difference, average or redundant) sensor input
• Function blocks: 2 analogue, 1 PID
• FISCO certified
• Basic or LAS capability
• Galvanic isolation

 

Configuration Tools:

• The STT17C configures the STT650 programmable and HART units.
• The intuitive graphical user interface of the STT17C virtually eliminates the need for operator training after installation on a PC
• The STT17C includes all software and transmitter interface hardware necessary to configure the STT650 programmable and HART models in non-hazardous work environments
• Warning: The STT17C is not approved for use in Hazardous work environments

 

Part of the SmartLine family of products, the STT850 is a high performance Temperature transmitter offering high accuracy and stability over a wide range of process and ambient temperatures. The SmartLine family is also fully tested and compliant with Experion PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding needs for temperature measurement applications.

Reliable measurement:

• Built in Galvanic Isolation
• Differential/Averaging/Redundant/Split Range measurements
• Dual Compartment Housing
• Sensor Break detection
• Comprehensive on-board diagnostic capabilities
• Full compliance tSIL 2/3 requirements.
• Available with 15 year warranty
• Supports Namur 107* Extended Diagnostics
• Supports Namur 89 Wire break

Lower Cost of Ownership:

• Universal input
• Dual sensor option
• Multiple local display capabilities
• Modular construction
• External zero, span, & configuration capability
• Polarity insensitive loop wiring
• Digital Output Option

Communications/Output Options:

• 4-20mA dc
• Honeywell Digitally Enhanced (DE)
• HART (version 7.0)
• Foundation Fieldbu compliant tITK 6.1.1
• All transmitters are available with the above listed communications protocols

Description:

• The SmartLine Temperature transmitter is designed and manufactured tdeliver very high performance across varying ambient temperature.
• The total accuracy level of the transmitter including the ambient temperature effect in, harsh industrial environments, allows the STT850 treplace virtually any competitive transmitter available today

Unique Indication/Display Options:

• The STT 850 modular design accommodates a basic alphanumeric LCD display or a unique advanced graphics LCD display with many unparalleled features.

Basic Alphanumeric LCD Display:

• Modular (may be added or removed in the field)
• 0, 90,180, & 270 degree position adjustments
• Deg C , F, R and Kelvin measurement units
• 2 Lines 16 Characters (4.13H x 1.83W mm)
• Up t8 display screens with similar formats
• Configurable screen rotation timing (3 t30 sec)
• Auto/Manual selection for screen rotation
• Displays up t9 Datapoints - Loop PV, CJ Temperature, Sensor 1, Sensor 2, Sensor Delta, RTD 1 Resistance, RTD 2 Resistance, Loop output, Percent Loop.
• Out of Range Indication
• PV Status and critical fault indication

Advanced Graphics LCD Display:

• Modular (may be added or removed in the field)
• 0, 90, 180, & 270 degree position adjustments
• Up teight display screens with 3 formats are possible (Large PV with Bar Graph or PV with Trend Graph)
• Configurable screen rotation timing (3 t30 sec)
• Provides instant visibility for diagnostics
• Multiple language capability. (EN, GE, FR, IT, SP, RU, TR, CN & JP)

Integral Three Button Configuration Option:

• Suitable for all electrical and environmental requirements,
• SmartLine offer the ability tconfigure the transmitter and display via three externally accessible buttons when either
• display option is selected.
• Zero/span capabilities are also optionally available via these buttons with or without selection of a display option.

Hand Held Configuration:

• SmartLine transmitters feature two-way communication and configuration capability between the operator and the transmitter
• This is accomplished via Honeywell’s field-rated
• Multiple Communication Configuration